Shafer's Classic Reproductions - Engine Related Parts
Browse Engine Related Parts Products
Items 1-60 of 65
- Page 1 of 2
- Next
Description: Oil filter hoses, 6 cyl. 2 hoses that connect the engine to the oil filter canister. Includes fittings to install hoses.
Item #: OFH002
Condition:
New
Price: $72.00
Description: 396/427 big block
Item #: OPB002
Condition:
New
Price: $30.00
Description: Firewall pad retainer clips, 7 piece kit
Item #: FPR001
Condition:
New
Price: $28.00
Description: Powerglide shift detent. All with powerglide transmission.
Item #: PSD001
Condition:
New
Price: $25.00
Description: 6 or 8 cyl. full size Chevrolet exc. hi-perf. Original style bracket with no cut-in. (1.8 OHMS) Made in the USA
Item #: D1110
Condition:
New
Price: $35.00
Description: Automatic transmission
Item #: DSB001
Condition:
New
Price: $4.50
Description: Water pump rebuild kit. V8 only. Includes all correct pan head screws, star lockwashers, gasket seals, rear flat steel plate, bearing and shaft.
Item #: WPK001
Condition:
New
Price: $130.00
Description: Brass adapter. One per package. Fits PSH002, PSH004, PSH006. Inverted flare to straight fitting. Screws directly into pump.
Item #: PSHA01
Condition:
New
Price: $10.00
Description: Ground strap kit. 6 or 8 cyl.
Item #: GSK001
Condition:
New
Price: $30.00
Description: Hood latch spring kit. Includes 1 clock spring and 2 extension springs.
Item #: HLS001
Condition:
New
Price: $25.00
Description: Valve cover stencil kit, 8 cyl. For painting script on valve covers.
Item #: VCS001
Condition:
New
Price: $25.00
Description: Water pump backing plate kit. Includes flat backing plate, screws, lockwashers and gasket. Like original. Fits small block.
Item #: WPP001
Condition:
New
Price: $35.00
Description: Valve cover screws for cars with A/C. 2 per car. Right lowe side of valve cover.
Item #: ACS001
Condition:
New
Price: $30.00
Description: Original type screws and washers. Used to attach timing cover.
Item #: TCS001
Condition:
New
Price: $12.00
Description: Fits 265, 283 and 327 Corvette. 8 per set. Used to fasten valve cover to heads. Like original. Use with steel valve covers only.
Item #: VCRB01
Condition:
New
Price: $13.00
Description: Oil pan bolt kit. Small block. Bolts required to fasten oil pan to block. Like original.
Item #: OPB001
Condition:
New
Price: $16.00
Description: Felt washer. Steering ball seal that goes between the ball and the pitman arm on the steering box and the steering drag link.
Item #: GFW001
Condition:
New
Price: $5.00
Description: Felt washers. Clutch z-bar linkage seals. One each end. 2 per package.
Item #: GFW002
Condition:
New
Price: $5.00
Description: Intake manifold washer, stainless steel. 8 cyl. small block. Used on aluminum intake manifold only. Keeps bolt from marring aluminum intake manifold. Washer does not show after installation.
Item #: IMW001
Condition:
New
Price: $12.00
Description: Oil filter hoses, 6 cyl. 2 hoses that connect the engine to the oil filter canister. Includes fittings to install hoses.
Item #: OFH001
Condition:
New
Price: $72.00
Description: All 327, 348 and 409. Original type screws and washers. Used to attach timing cover.
Item #: TCS400
Condition:
New
Price: $12.00
Description: Oil filter lines, 8 cyl. with AC. Includes all fittings.
Item #: OFL002
Condition:
New
Price: $40.00
Description: Oil filter lines, 8 cyl. Includes all fittings.
Item #: OFL001
Condition:
New
Price: $40.00
Description: Outer dipstick tube, small block Passenger and Corvette, V8
Item #: IDT002
Condition:
New
Price: $13.00
Description: Carburetor/accelerator linkage kit, 2-4 bbl. Includes all hardware. Reproduced exactly like original.
Item #: ALK001
Condition:
New
Price: $125.00
Description: Exhaust block off plate to manifold. Plate goes between the intake manifold and cylinder head exhaust port on each side of manifold. This came in the glove box of every dual 4 bbl car. Can also...More Details »
Item #: EBOP01
Condition:
New
Price: $12.00
Description: Carburetor/accelerator linkage bracket and spring, 2-4 bbl.
Item #: BSK001
Condition:
New
Price: $58.00
Description: Draft tube mounting kit. 8 cyl. Like original. Includes black bolt, washer and 2 gaskets.
Item #: DMK001
Condition:
New
Price: $13.00
Description: Original style bracket with half-moon cut-in (.3 OHMS). Fits 1955-61 Corvette with 12 volt, 1956-64 8 cyl. full size Chevrolet all with hi-perf. engine, 1963-64 Corvette with spec. hi-perf. FI. Made in the USA.
Item #: D1111
Condition:
New
Price: $35.00
Item #: BHR001
Condition:
New
Price: $8.00
Description: Battery hold down bracket only
Item #: BHB001
Condition:
New
Price: $25.00
Description: Battery hold down kit
Item #: BHD001
Condition:
New
Price: $42.00
Description: 6 or 8 cyl. full size Chevrolet exc. hi-perf. Original style bracket with half moon cut-in. (1.8 OHMS) Also fits 1963-64 Corvette 2nd design exc. spec. hi-perf. and F.I. and 1965 Corvette and...More Details »
Item #: D1110-A
Condition:
New
Price: $35.00
Description: Inner dipstick tube, small block V8
Item #: IDT001
Condition:
New
Price: $12.00
Description: Goes from fire wall to fuel injection unit.
Item #: FIAR01
Condition:
New
Price: $34.00
Description: Heater blower hole cover. Cadmium plated.
Item #: HBC001
Condition:
New
Price: $35.00
Description: Powerglide shift detent. All with powerglide transmission.
Item #: PSD002
Condition:
New
Price: $25.00
Description: 348 and 409. Used to fasten valve cover to heads. Like original.
Item #: VCRB42
Condition:
New
Price: $18.00
Description: Intake manifold washer, stainless steel. 8 cyl. 348 & 409 only. Used on aluminum intake manifold only. Keeps bolt from marring aluminum intake manifold. Washer does not show after installation.
Item #: IMW400
Condition:
New
Price: $12.00
Description: 348 and 409
Item #: OPB400
Condition:
New
Price: $30.00
Description: Water pump rebuild kit - 283-327. Includes all correct screws, star lockwashers, gasket seals, rear flat steel plate, bearing and shaft.
Item #: WPK402
Condition:
New
Price: $130.00
Description: Water pump rebuild kit - 348 and 409. Includes all correct screws, star lockwashers, gasket seals, rear flat steel plate, bearing and shaft. Click on the Customer Service tab above to download the instructions.
Item #: WPK401
Condition:
New
Price: $130.00
Description: Ground strap kit. 6 or 8 cyl.
Item #: GSK400
Condition:
New
Price: $30.00
Description: Includes 6 screws, 6 clips and 2 wires.
Item #: HIR400
Condition:
New
Price: $80.00
Description: 6 or 8 cyl.
Item #: GSK401
Condition:
New
Price: $30.00
Description: Hood insulation retainer kit.
Item #: HIR401
Condition:
New
Price: $75.00
Description: Engine side of firewall between hose and firewall. Also fits 1962-64 Fairlane. 2 pcs.
Item #: HCG600
Condition:
New
Price: $6.00
Description: Felt washers, 2 per package. A, B and X body 6 or 8 cyl. with manual transmission. Felt washers that go on each end of the Z bar linkage brackets. Full size Ford, Falcon and Fairlane
Item #: GFW600
Condition:
New
Price: $5.00
Description: Bolt that hooks into the body and attaches to the gas tank straps that holds up the gas tank.
Item #: GTB600
Condition:
New
Price: $20.00
Description: Heater valve control wire
Item #: HVC001
Condition:
New
Price: $8.00
Description: 6 or 8 cyl.
Item #: GSK402
Condition:
New
Price: $30.00
Description: Later years and 2nd design bracket. (.3 OHMS)
Item #: D1111-A
Condition:
New
Price: $35.00
Description: Carb./accelerator linkage kit, 409. Includes all hardware. Reproduced exactly like original.
Item #: ALK400
Condition:
New
Price: $115.00
Description: Charging system shunt. Fits 1963-65 Nova, Super Sport and 1964 Chevelle Malibu
Item #: D1400
Condition:
New
Price: $55.00
Description: Corvette ballast resistor .3 ohms. Used on all Corvettes with 091 coils.
Item #: D1110-B
Condition:
New
Price: $35.00
Description: Retainer strip that fastens rear bumper dust shield to body.
Item #: RSF600
Condition:
New
Price: $30.00
Description: 427 Ford with cast iron headers only
Item #: FML001S
Condition:
New
Price: $33.00
Description: Nut that bolts the carburetor to the intake manifold. Special thin nut like the original with fine threads.
Item #: MCN001
Condition:
New
Price: $6.00
Description: Fits 6 or 8 cyl., Nut that bolts the carburetor to the intake manifold. Special thin nut like the original with the threads. 4 per package.
Item #: MCN001
Condition:
New
Price: $6.00
Items 1-60 of 65
- Page 1 of 2
- Next