- Home »
- Catalog »
- Shop by Vehicle »
- 1950-57 Chevy Car
Shafer's Classic Reproductions - 1950-57 Chevy Car
Browse 1950-57 Chevy Car Products
Description: Air horn rod. Passenger cars with F.I. Attaches air cleaner to air horn.
Item #: CACR08
Condition:
New
Price: $15.00
Description: Exhaust manifold tube, stainless steel. Goes inside exhaust manifold.
Item #: EMT001
Condition:
New
Price: $12.00
Description: Exhaust manifold bolt locks. Stainless steel. Set of 4. Note: Use anti-seize on bolt to prevent deforming lock.
Item #: EML001
Condition:
New
Price: $20.00
Description: Fits 2" exhaust pipe
Item #: 62001
Condition:
New
Price: $12.00
Description: Resistor fits 6 or 8 cyl. full size Chevrolet exc. hi-perf. Original style bracket with half moon cut-in. (1.8 OHMS) Also fits 1963-64 Corvette 2nd design exc. spec. hi-perf. and F.I. and 1965...More Details »
Item #: D1110-A
Condition:
New
Price: $35.00
Price: $6.00
Price: $10.00
Description: 8 cyl. with 2" exhaust. Also fits 1957-74 Corvette and 1967-72 small block Camaro.
Item #: EMR001
Condition:
New
Price: $110.00
Description: 8 cyl. with 2-1/2" exhaust, Hi-Performance only. Also fits 1957-74 Corvette and 1967-72 big block Camaro.
Item #: EMR002
Condition:
New
Price: $123.00
Description: 8 cyl. with 2" exhaust and Ram's horn manifold. Modified unit, straight through. Also fits 1957-74 Corvette and 1967-72 small block Camaro.
Item #: EMR003
Condition:
New
Price: $80.00
Description: 8 cyl. with 2-1/2" exhaust manifold. Modified unit, straight through. Also fits 1957-74 Corvette and 1967-72 big block Camaro.
Item #: EMR004
Condition:
New
Price: $104.00
Description: Inner dipstick tube, small block V8
Item #: IDT001
Condition:
New
Price: $12.00
Description: 8 cyl. with 2-4 bbl.
Item #: HRT006
Condition:
New
Price: $5.00
Description: 8 cyl. with Rochester or Carter 4 bbl. Cut 1/2" from tube at heat riser housing end.
Item #: HRT001
Condition:
New
Price: $5.00
Description: 8 cyl. with Rochester or Carter 4 bbl. Cut 1/2" from tube at heat riser housing end., 304 stainless steel
Item #: HRT001S
Condition:
New
Price: $13.00
Description: 8 cyl. with 2-4 bbl., 304 stainless steel
Item #: HRT006S
Condition:
New
Price: $13.00
Description: Clamp and hanger kit includes 2 manifold studs, muffler hanger, 1-7/8" muffler hanger clamp, 2" muffler clamps, tailpipe bracket and tailpipe hanger.
Item #: 64002
Condition:
New
Price: $125.00
Description: Kit includes heat riser gasket, 3 left and right manifold studs, 3 intermediate bolt sets, muffler hanger, 1-7/8" muffler hanger clamp, 2" muffler clamp, tailpipe bracket and tailpipe hanger.
Item #: 64005
Condition:
New
Price: $215.00
Description: Kit includes heat riser gasket, 3 left and right manifold studs, 2 crossover pipe clamps, right muffler bracket, 2 muffler supports, 2 1-7/8" muffler hanger clamps, 2 2" muffler clamps, 2 tailpipe...More Details »
Item #: 64008
Condition:
New
Price: $275.00
Description: Convertible 6 cyl. Clamp and hanger kit #64002 must be ordered separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if you would like the pipes cut so...More Details »
Item #: 63019
Condition:
New
Price: $395.00
Free Shipping!
Description: Hardtop 8 cyl. all dual exhaust models without crossover pipes. Clamp and hanger kit 64015 sold separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if...More Details »
Item #: 63044
Condition:
New
Price: $700.00
Free Shipping!
No Image Available
Description: Convertible 8 cyl. all dual exhaust models without crossover pipes. Clamps and hanger kits 64015 sold separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call...More Details »
Item #: 63045
Condition:
New
Price: $700.00
Free Shipping!
No Image Available
Description: Station Wagon exc. 9 Pass. 8 cyl. all dual exhaust models without crossover pipes. Clamp and hanger kit 64015 sold separately. Due to this system being oversized shipping is a flat rate of...More Details »
Item #: 63046
Condition:
New
Price: $700.00
Free Shipping!
Description: 8 cyl. 2 bbl. used with fuel filter
Item #: GLK004
Condition:
New
Price: $18.00
Description: 8 cyl. 2-4 bbl. passenger car only. 2 pc. line set with all original style fittings. Filter required (part number FBA001).
Item #: GLK008
Condition:
New
Price: $79.00
Description: 8 cyl. F.I. 2 pcs. Pump to filter line and line from filter to F.I. Unit.
Item #: GLK009
Condition:
New
Price: $64.00
Description: 8 cyl. Carter 4 bbl. with factory air. Used without fuel filter.
Item #: GLK012
Condition:
New
Price: $18.00
Description: 8 cyl. Carter 4 bbl. With factory air. Used with fuel filter.
Item #: GLK014
Condition:
New
Price: $18.00
Description: 8 cyl. F.I. 2 pcs. Pump to filter line and line from filter to F.I. Unit., 304 stainless steel
Item #: GLK009S
Condition:
New
Price: $73.00
Description: 8 cyl. Carter 4 bbl. with factory air. Used without fuel filter., 304 stainless steel
Item #: GLK012S
Condition:
New
Price: $25.00
Description: 8 cyl. Carter 4 bbl. With factory air. Used with fuel filter, 304 stainless steel
Item #: GLK014S
Condition:
New
Price: $25.00
Description: 8 cyl. 2 bbl. used with fuel filter, 304 stainless steel
Item #: GLK004S
Condition:
New
Price: $25.00
Description: 8 cyl. 2-4 bbl. passenger car only. 2 pc. line set with all original style fittings. Filter required (part number FBA001)., 304 stainless steel
Item #: GLK008S
Condition:
New
Price: $92.00
No Image Available
Description: 8 cyl. with AC. Reproduction of original style ribbed hose. Includes original style hose clamps. Made in the U.S.A.
Item #: OHK004
Condition:
New
Price: $45.00
No Image Available
Description: 6 cyl. Reproduction of original style ribbed hose. Includes original style hose clamps. Made in the U.S.A.
Item #: OHK006
Condition:
New
Price: $45.00
Description: 8 cyl. Powerglide. Lines go over transmission mount. Like original.
Item #: OCL003
Condition:
New
Price: $50.00
Description: 8 cyl. Powerglide. Lines go over transmission mount. Like original., 304 stainless steel
Item #: OCL003S
Condition:
New
Price: $80.00
Description: Hardtop 8 cyl. All dual. Clamp and hanger kit # 64008 must be purchased separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if you would like the...More Details »
Item #: 63024
Condition:
New
Price: $780.00
Free Shipping!
Description: Carburetor air cleaner rod. 8 cyl. 2-4 bbl. Holds air cleaner to carburetor. Includes 2 rods. Rolled thread like original. Includes wing nuts and washers if applicable.
Item #: CACR03
Condition:
New
Price: $25.00
Description: Carburetor air cleaner rod. 8 cyl. 2 bbl. Rolled thread like original. Includes wing nuts and washers if applicable.
Item #: CACR10
Condition:
New
Price: $15.00
Description: 8 cyl. with 2 bbl.
Item #: HRT002
Condition:
New
Price: $5.00
Description: 8 cyl. with 2 bbl., 304 stainless steel
Item #: HRT002S
Condition:
New
Price: $13.00
Description: 1-3/4" clamp. Used with 60008 and 60009 crossover pipes and 1957 style exhaust.
Item #: 62020
Condition:
New
Price: $8.00
Description: Kit includes heat riser gasket, 3 left and right manifold studs, right muffler bracket, 2 muffler supports, 2 1-7/8" muffler hanger clamps, 2 2" muffler clamps, 2 tailpipe brackets and left and right tailpipe hangers.
Item #: 64015
Condition:
New
Price: $265.00
Description: Exhaust manifold stud, sold each. Stainless steel with nut. 2-1/2" long. No tip. 8 cyl., left side.
Item #: EMS002
Condition:
New
Price: $19.00
No Image Available
Description: Hardtop 6 cyl. Clamp and hanger kit # 64002 must be ordered separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if you would like the pipes cut so...More Details »
Item #: 63018
Condition:
New
Price: $395.00
Free Shipping!
Description: Station Wagon exc. 9 Pass. 6 cyl. Clamp and hanger kit #64002 must be ordered separately.
Item #: 63020
Condition:
New
Price: $395.00
Free Shipping!
Description: Hardtop 8 cyl. single exhaust. Clamp and hanger kit # 64005 must be ordered separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if you would like the...More Details »
Item #: 63021
Condition:
New
Price: $450.00
Free Shipping!
Description: Convertible 8 cyl. single exhaust. Clamp and hanger kit # 64005 must be ordered separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if you would like...More Details »
Item #: 63022
Condition:
New
Price: $450.00
Free Shipping!
Description: Station Wagon exc. 9 Pass. 8 cyl. single exhaust. Clamp and hanger kit # 64005 must be ordered separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if...More Details »
Item #: 63023
Condition:
New
Price: $450.00
Free Shipping!
Description: Convertible 8 cyl. all dual. Clamp and hanger kit # 64008 must be purchased separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if you would like the...More Details »
Item #: 63025
Condition:
New
Price: $780.00
Free Shipping!
Description: Station Wagon exc. 9 Pass. 8 cyl. all dual exhaust models. Clamp and hanger kit # 64008 sold separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us if...More Details »
Item #: 63026
Condition:
New
Price: $780.00
Free Shipping!
Description: Fuel door bumper kit
Item #: FDB001
Condition:
New
Not Available
Price: $26.00
Description: Goes from fire wall to fuel injection unit.
Item #: FIAR01
Condition:
New
Price: $34.00
Description: Gas tank vent strap. Ties gas tank filler tube and vent hose together.
Item #: GTVS01
Condition:
New
Price: $7.50
Description: Heater blower hole cover. Cadmium plated.
Item #: HBC001
Condition:
New
Price: $35.00
Description: Linkage kit. Fuel injection with Powerglide. Rod that hooks from carburetor to upper control arm on passing gear lever. Includes lever, adjuster and 2 spring steel attaching clips.
Item #: CLRP01
Condition:
New
Price: $30.00
Description: Linkage kit - 8 cyl. 2 bbl. Rod that hooks from carburetor to upper control arm on passing gear lever. Includes lever, adjuster and 2 spring steel attaching clips.
Item #: CLRP03
Condition:
New
Price: $30.00
Description: Linkage kit - 8 cyl. 4 bbl. Rod that hooks from carburetor to upper control arm on passing gear lever. Includes lever, adjuster and 2 spring steel attaching clips.
Item #: CLRP06
Condition:
New
Price: $30.00
Description: 11 pcs.
Item #: LGRC01
Condition:
New
Price: $15.00