Shafer's Classic Reproductions - Product Search
Browse Products
Description: A-frame bushing retainer washer; upper 3/8" hole
Item #: BRW002
Condition:
New
Price: $5.00
Description: Glass fuel bowl assembly. Like original with AC stamped on glass. Fit Full size Chevrolet except fuel injection.
Item #: GF48
Condition:
New
Price: $48.00
Description: Oil pan bolt kit. Small block. Bolts required to fasten oil pan to block. Like original.
Item #: OPB001
Condition:
New
Price: $16.00
Description: Brake drum spring. Goes around drum
Item #: BDS001
Condition:
New
Price: $20.00
Description: Includes 2 clips as required per car. Attaches parking brake cable.
Item #: EBC001
Condition:
New
Price: $7.00
Description: Felt washer. Steering ball seal that goes between the ball and the pitman arm on the steering box and the steering drag link.
Item #: GFW001
Condition:
New
Price: $5.00
Description: Felt washers. Clutch z-bar linkage seals. One each end. 2 per package.
Item #: GFW002
Condition:
New
Price: $5.00
Description: 1955-64 Chevrolet 6 cyl. exhaust pipe and 1955-56 8 cyl. intermediate exhaust pipe
Item #: 62000
Condition:
New
Price: $20.00
Description: Gas filter element and gasket
Item #: GF124-SHA
Condition:
New
Price: $12.00
Description: 8 cyl. single exhaust
Item #: 62023
Condition:
New
Price: $6.00
Description: Linkage rod bushing kit - All 6 and 8 cyl. 2 bushings per pkg. In some engine applications only 1 bushing is required. Also fits 1955-64 Corvette.
Item #: CLRB01
Condition:
New
Price: $12.00
Description: Intake manifold washer, stainless steel. 8 cyl. small block. Used on aluminum intake manifold only. Keeps bolt from marring aluminum intake manifold. Washer does not show after installation.
Item #: IMW001
Condition:
New
Price: $12.00
Description: Oil filter hoses, 6 cyl. 2 hoses that connect the engine to the oil filter canister. Includes fittings to install hoses.
Item #: OFH001
Condition:
New
Price: $72.00
Description: Return hose. For application with 605 steering box. Inverted flare style.
Item #: PSH003
Condition:
New
Price: $30.00
Description: Return hose. For application with 605 steering box. Big block or small block. O-ring style.
Item #: PSH007
Condition:
New
Price: $30.00
Description: A-frame bushing retainer washer; lower 7/16" hole.
Item #: BRW001
Condition:
New
Price: $5.00
Description: Strainer. All with 5/16" line exc. 2-4 bbl. And F.I.
Item #: 5651705-SHA
Condition:
New
Price: $13.00
Description: 1 pair. Holds transmission cooler lines together.
Item #: LRC001
Condition:
New
Price: $6.00
Description: Wheel cylinder french lockwasher. Front only. Also used with front disc brakes.
Item #: WCW001
Condition:
New
Price: $3.50
Description: Radiator drain valve. Includes correct style petcock with hose.
Item #: RPC001
Condition:
New
Price: $18.00
Description: 3/4" wire Corbin
Item #: HHC002
Condition:
New
Price: $4.00
Description: Adjustable proportioning valve with bracket
Item #: APV001
Condition:
New
Price: $90.00
Description: Bearing, Outer, Fits all with disc brakes. Used with BRO001 brake rotor.
Item #: BEA001
Condition:
New
Price: $18.00
Description: Bolt and gasket kit. Fits all with disc brakes. Bolt and copper washers that hold the disc brake hose to the caliper. Used with CDBH01 disc brake hose.
Item #: BGK001
Condition:
New
Price: $5.00
Description: Remanufactured left hand loaded wheel caliper assembly. Includes remanufactured caliper, top quality disc pads, all new or renewed hardware
Item #: L76813
Condition:
New
Price: $198.00
Description: Remanufactured right hand loaded wheel caliper assembly. Includes remanufactured caliper, top quality disc pads, all new or renewed hardware.
Item #: L76814
Condition:
New
Price: $198.00
Description: Brake hose clip. Also used on brass brake block on rear housing. Includes 4 clips as required per car.
Item #: BHC001
Condition:
New
Price: $8.50
Description: Brake hose clip, pair. Used for disc brake conversion kits.
Item #: BHC002
Condition:
New
Price: $5.00
Description: Disc brake hose. No modification required to fitting end that goes into frame bracket.
Item #: CDBH01
Condition:
New
Price: $28.00
Description: 5/8" wire Corbin
Item #: HHC001
Condition:
New
Price: $4.00
Description: Seal. Used with BRO001 brake rotor.
Item #: SEA001
Condition:
New
Price: $4.50
Description: Spindle nut and washer kit. Used with disc brakes. Includes 2 cotter keys, 2 spindle washers, 2 extra thin spindle nuts.
Item #: SNW001
Condition:
New
Price: $22.00
Description: Bearing, Inner, Fits all with disc brakes. Used with BRO001 brake hose.
Item #: BEA002
Condition:
New
Price: $24.00
Description: Drilled and slotted brake rotor, left or right
Item #: BRO001
Condition:
New
Price: $95.00
Description: Front brake hose fits full size Chevrolet
Item #: FBH001
Condition:
New
Price: $17.00
Description: Brass fuel sending unit float. Fits all sending units with brass float.
Item #: SUF001
Condition:
New
Price: $13.00
Description: All 327, 348 and 409. Original type screws and washers. Used to attach timing cover.
Item #: TCS400
Condition:
New
Price: $12.00
Description: Proportioning valve
Item #: 172-1364-SHA
Condition:
New
Price: $88.00
Description: Fuel, PCV and distributor vacuum lines. Chevrolet 350-327 with Edelbrock 4 bbl. carb. and Holley type fuel pump. Includes required hoses. Available only in stainless steel.
Item #: ELK001S
Condition:
New
Price: $73.00
Description: Exhaust manifold washers, stainless steel. All 8 cyl.
Item #: EMW001
Condition:
New
Price: $14.00
Description: Rear end housing copper washer and nut kit. 10 cad plated nuts and copper washers used to attach third member.
Item #: HNK001
Condition:
New
Price: $20.00
Description: 1955 Buick Century 332 V8, Return hose
Item #: PSH2000
Condition:
New
Price: $50.00
Description: 1955 Buick Century 332 V8, Pressure hose
Item #: PSH2001
Condition:
New
Price: $50.00
Description: 6 or 8 Cyl. Single Exhaust Inside Frame
Item #: LBL006
Condition:
New
Price: $35.00
Description: 6 or 8 cyl. Single exhaust, Inside Frame
Item #: LBL003
Condition:
New
Price: $35.00
Description: 8 Cyl Dual Exhaust Outside Frame
Item #: LBL004
Condition:
New
Price: $35.00
Description: Front left. Tee used to connect front lines.
Item #: BJB55L
Condition:
New
Price: $19.50
Description: Front right. Tee used to connect front lines.
Item #: BJB55R
Condition:
New
Price: $19.50
Description: Fits 1955 8 cyl. 4 bbl. and 1955-56 8 cyl. 2 bbl. used without fuel filter
Item #: GLK002
Condition:
New
Price: $18.00
Description: 1956 Chevrolet 2" dual 8 cyl. Station Wagon exc. 9 passenger with round glass pack mufflers. Glass pack mufflers are not available in stainless steel. Original style manifolds. Clamp and hanger...More Details »
Item #: 63099
Condition:
New
Price: $550.00
$175 Flat Rate Shipping
Description: 6 cyl. all models. Includes 2 stainless steel manifold studs and nuts, muffler hanger, 1-7/8" muffler hanger clamp, rebound clip, tailpipe hanger and 2" muffler clamp.
Item #: 64000
Condition:
New
Price: $105.00
Description: Kit includes heat riser gasket, 2 left and right stainless steel manifold studs, left and right muffler brackets, 2 muffler hangers, 2 1-7/8" muffler hanger clamps, 2 2" muffler clamps, 2 rebound...More Details »
Item #: 64006
Condition:
New
Price: $185.00
Description: Hardtop with 1957 manifolds 8 cyl. all dual exhaust with Ram's Horn manifolds. System does not include crossover pipes. Clamp and hanger kit # 64013 must be ordered separately. Due to this system...More Details »
Item #: 63047
Condition:
New
Price: $700.00
$175 Flat Rate Shipping
No Image Available
Description: Station Wagon with 1957 manifolds exc. 9 Pass. 8 cyl. dual exhaust with Ram's Horn manifolds. System does not include crossover pipes. Clamp and hanger kit # 64013 must be ordered separately. Due...More Details »
Item #: 63049
Condition:
New
Price: $700.00
$175 Flat Rate Shipping
Description: Kit includes heat riser gasket, 3 each left and right stainless steel manifold studs, left and right muffler bracket, 2 muffler hangers, 2 1-7/8" muffler hanger clamps, 2 2" muffler clamps, 2...More Details »
Item #: 64013
Condition:
New
Price: $250.00
No Image Available
Description: Kit includes heat riser gasket, 2 stainless steel manifold studs left and right, muffler hanger, 1-7/8" muffler hanger clamp, 2" muffler clamp, rebound clip, tailpipe hanger and 2 intermediate bolt sets.
Item #: 64003
Condition:
New
Price: $130.00
Description: Convertible with 1957 manifolds 8 cyl. all dual with Ram's Horn manifolds. System does not include crossover pipes. Clamp and hanger kit # 64013 must be ordered separately. Due to this system...More Details »
Item #: 63048
Condition:
New
Price: $700.00
$175 Flat Rate Shipping
Description: Carburetor air cleaner rod. 8 cyl. 4 bbl. Rolled thread like original. Includes wing nuts and washers if applicable.
Item #: CACR01
Condition:
New
Price: $15.00
Description: Available in aluminized steel or 304 stainless steel. Clamp and hanger kit # 64006 must be ordered separately. Due to this system being oversized shipping is a flat rate of $250.00. Please call us...More Details »
Item #: 63007
Condition:
New
Price: $700.00
$175 Flat Rate Shipping
Description: Clamp and hanger kit #64003 must be ordered separately. Available in aluminized steel or 304 stainless steel.
* * Free shipping available for this system with tailpipe cut to fit in smaller box. Please call if interested. * *
Item #: 63004
Condition:
New
Price: $450.00
$175 Flat Rate Shipping