- Home »
- Catalog »
- Shop by Vehicle »
- 1965-up Chevy Car
Shafer's Classic Reproductions » Shafer's Classic
Browse 1965-up Chevy Car Products
Description: All 3/16"., 304 Stainless Steel
Item #: LBL402S
Condition:
New
Price: $96.00
Description: Big block, 3/8", Stainless Steel
Item #: GLL409S
Condition:
New
Price: $95.00
No Image Available
Description: 1/4", 304 Stainless Steel
Item #: RGL401S
Condition:
New
Price: $110.00
Description: Chevrolet with drum brakes, sold each. Also fits 1950-70 Cadillac and 1970-90 GMC truck
Item #: BWC601
Condition:
New
Price: $10.00
Description: 396/427 big block
Item #: OPB002
Condition:
New
Price: $30.00
Description: Front spindle gasket
Item #: FSG001
Condition:
New
Price: $10.00
Description: Radiator drain valve. Includes correct style petcock with hose.
Item #: RPC001
Condition:
New
Price: $18.00
Description: 3/4" wire Corbin
Item #: HHC002
Condition:
New
Price: $4.00
Description: Adjustable proportioning valve with bracket
Item #: APV001
Condition:
New
Price: $90.00
Description: Bearing, Outer, Fits all with disc brakes. Used with BRO001 brake rotor.
Item #: BEA001
Condition:
New
Price: $18.00
Description: Bolt and gasket kit. Fits all with disc brakes. Bolt and copper washers that hold the disc brake hose to the caliper. Used with CDBH01 disc brake hose.
Item #: BGK001
Condition:
New
Price: $5.00
Description: Remanufactured left hand loaded wheel caliper assembly. Includes remanufactured caliper, top quality disc pads, all new or renewed hardware
Item #: L76813
Condition:
New
Price: $198.00
Description: Remanufactured right hand loaded wheel caliper assembly. Includes remanufactured caliper, top quality disc pads, all new or renewed hardware.
Item #: L76814
Condition:
New
Price: $198.00
Description: Brake hose clip. Also used on brass brake block on rear housing. Includes 4 clips as required per car.
Item #: BHC001
Condition:
New
Price: $8.50
Description: Brake hose clip, pair. Used for disc brake conversion kits.
Item #: BHC002
Condition:
New
Price: $5.00
Description: Disc brake hose. No modification required to fitting end that goes into frame bracket.
Item #: CDBH01
Condition:
New
Price: $28.00
Description: 5/8" wire Corbin
Item #: HHC001
Condition:
New
Price: $4.00
Description: Seal. Used with BRO001 brake rotor.
Item #: SEA001
Condition:
New
Price: $4.50
Description: Spindle nut and washer kit. Used with disc brakes. Includes 2 cotter keys, 2 spindle washers, 2 extra thin spindle nuts.
Item #: SNW001
Condition:
New
Price: $22.00
Description: Bearing, Inner, Fits all with disc brakes. Used with BRO001 brake hose.
Item #: BEA002
Condition:
New
Price: $24.00
Description: Drilled and slotted brake rotor, left or right
Item #: BRO001
Condition:
New
Price: $95.00
Description: Front brake hose fits full size Chevrolet
Item #: FBH001
Condition:
New
Price: $17.00
Description: Brass fuel sending unit float. Fits all sending units with brass float.
Item #: SUF001
Condition:
New
Price: $20.00
Description: All 327, 348 and 409. Original type screws and washers. Used to attach timing cover.
Item #: TCS400
Condition:
New
Price: $12.00
Description: Proportioning valve
Item #: 172-1364-SHA
Condition:
New
Price: $88.00
Description: Fuel, PCV and distributor vacuum lines. Chevrolet 350-327 with Edelbrock 4 bbl. carb. and Holley type fuel pump. Includes required hoses. Available only in stainless steel.
Item #: ELK001S
Condition:
New
Price: $73.00
Description: Exhaust manifold washers, stainless steel. All 8 cyl.
Item #: EMW001
Condition:
New
Price: $14.00
Price: $6.00
Price: $10.00
Description: 8 cyl. with 2" exhaust. Also fits 1957-74 Corvette and 1967-72 small block Camaro.
Item #: EMR001
Condition:
New
Price: $110.00
Description: 8 cyl. with 2-1/2" exhaust, Hi-Performance only. Also fits 1957-74 Corvette and 1967-72 big block Camaro.
Item #: EMR002
Condition:
New
Price: $123.00
Description: 8 cyl. with 2" exhaust and Ram's horn manifold. Modified unit, straight through. Also fits 1957-74 Corvette and 1967-72 small block Camaro.
Item #: EMR003
Condition:
New
Price: $80.00
Description: 8 cyl. with 2-1/2" exhaust manifold. Modified unit, straight through. Also fits 1957-74 Corvette and 1967-72 big block Camaro.
Item #: EMR004
Condition:
New
Price: $104.00
Description: Inner dipstick tube, small block V8
Item #: IDT001
Condition:
New
Price: $12.00
Description: 8 cyl. with 2" exhaust. Fits EMR001 and EMR003.
Item #: EMG001
Condition:
New
Price: $10.00
Description: 8 cyl. with 2-1/2" exhaust. Fits EMR002 and EMR004.
Item #: EMG002
Condition:
New
Price: $10.00
Description: 348, 409 (pair)
Item #: BHH400
Condition:
New
Price: $8.00
Description: Exhaust manifold bolt locks. 8 cyl. 348 and 409 stainless steel. Set of 4. Note: Use anti-seize on bolt to prevent deforming lock.
Item #: EML403
Condition:
New
Price: $20.00
Description: Upper Whittek tower
Item #: RHC003
Condition:
New
Price: $15.00
Description: Lower Whittek tower
Item #: RHC004
Condition:
New
Price: $15.00
Description: 8 cyl. 283-327 with Carter 4 bbl.
Item #: HRT400
Condition:
New
Price: $5.00
Description: 8 cyl. 283-327 with Carter 4 bbl., 304 stainless steel
Item #: HRT400S
Condition:
New
Price: $12.00
Description: Front and rear. Kit for converting from original to self-adjusting brakes. Includes all hardware for 4 wheels.
Item #: BHK402
Condition:
New
Price: $105.00
Description: Front only. Kit for converting from original to self-adjusting brakes. Includes all hardware for 2 front wheels.
Item #: BHKF42
Condition:
New
Price: $60.00
Description: Rear only. Kit for converting from original to self-adjusting brakes. Includes all hardware for 2 rear wheels.
Item #: BHKR42
Condition:
New
Price: $60.00
Description: Fits cars with 2 door bench seats.
Item #: SSK001
Condition:
New
Price: $20.00
Description: 2 required per cylinder. Sold each.
Item #: CMB001
Condition:
New
Price: $12.00
Description: Fits the following: 1960-62 Buick, 1959-67 Cadillac, 1961-64 Oldsmobile, 1963-65 Chevrolet 409 2-4 bbl. and 4 bbl. 340-400-425 hp.
Item #: GF201
Condition:
New
Price: $90.00
No Image Available
Description: Exhaust manifold bolt locks. 8 cyl. 283 & 327 Nova only. Stainless steel. Set of 4. Note: Use anti-seize on bolt to prevent deforming lock.
Item #: EML003
Condition:
New
Price: $20.00
Description: Comes with stock mufflers.
Item #: 73027
Condition:
New
In response to rising shipping costs, we have designed a two piece tailpipe that has an expanded slip joint that is held together with an exhaust clamp. This allows us to ship your order in a more compact box and avoid high surcharges that carriers charge for oversized packages. This will not affect the performance of your exhaust system. We include all necessary clamps to easily connect the tailpipe during installation. If you prefer a one piece tailpipe please contact us for a shipping quote. If you have any questions before ordering, feel free to contact us!
Price: $850.00
Description: Big block with 2" tailpipes. Low horse power. Tailpipes turn down at the bumper. Comes with stock mufflers.
Item #: 73028
Condition:
New
In response to rising shipping costs, we have designed a two piece tailpipe that has an expanded slip joint that is held together with an exhaust clamp. This allows us to ship your order in a more compact box and avoid high surcharges that carriers charge for oversized packages. This will not affect the performance of your exhaust system. We include all necessary clamps to easily connect the tailpipe during installation. If you prefer a one piece tailpipe please contact us for a shipping quote. If you have any questions before ordering, feel free to contact us!
Price: $850.00
No Image Available
Description: 2.5" Big block dual turbo exhaust system. Used with 2.5" stock manifolds with 2.5" tailpipes with Quickflow mufflers. Tailpipes exit straight out the back.
Item #: 73030
Condition:
New
In response to rising shipping costs, we have designed a two piece tailpipe that has an expanded slip joint that is held together with an exhaust clamp. This allows us to ship your order in a more compact box and avoid high surcharges that carriers charge for oversized packages. This will not affect the performance of your exhaust system. We include all necessary clamps to easily connect the tailpipe during installation. If you prefer a one piece tailpipe please contact us for a shipping quote. If you have any questions before ordering, feel free to contact us!
Price: $850.00
Description: 2.5" dual turbo exhaust small block. Used with 2" stock manifolds with 2-1/2" tailpipes with Quickflow mufflers. Tailpipes exit straight out the back. Quickflow mufflers are available in steel only.
Item #: 73032
Condition:
New
In response to rising shipping costs, we have designed a two piece tailpipe that has an expanded slip joint that is held together with an exhaust clamp. This allows us to ship your order in a more compact box and avoid high surcharges that carriers charge for oversized packages. This will not affect the performance of your exhaust system. We include all necessary clamps to easily connect the tailpipe during installation. If you prefer a one piece tailpipe please contact us for a shipping quote. If you have any questions before ordering, feel free to contact us!
Price: $800.00
Description: Standard brakes 3 pcs
Item #: FBL405
Condition:
New
Price: $55.00
Description: Standard brakes 3 pcs, 304 stainless steel
Item #: FBL405S
Condition:
New
Price: $75.00
Description: 396 with Quadrajet
Item #: GLK412
Condition:
New
Price: $18.00
Description: 396 with Quadrajet, 304 stainless steel
Item #: GLK412S
Condition:
New
Price: $27.00
Description: Used with 3/8" fuel line
Item #: GLC402
Condition:
New
Price: $8.00
Description: Small block, 5/16"
Item #: GLL404
Condition:
New
Price: $70.00
Description: Big block, 3/8"
Item #: GLL405
Condition:
New
Price: $70.00